DAS-G01 Capacitive Touch 7” colorful Multi Protocols Wi-Fi Smart Controller

DAS-G01 Smart Capacitive Touch Multi Protocols Wi-Fi Controller is applied for:

  • Building Management System, Guest Room Management System
  • Home Automation, Lighting Control System
  • Intrusion Alarm System, Maid Calling System
  • BTU, Water, Gas & Electricity Meters
  • Façade & Landscape Lighting Control System
  • Chilled Water System Monitor & Control
  • Swimming Pools Control
  • Air Quality Control
  • Elevators & Escalators
  • Air Handling Units, Fan Coil Unit’s & Package Unit’s Control
  • Supply, Exhaust, Pressurization & Ventilation Fan’s
  • Heating / Cooling, Irrigation, Fountain, Lifting Pumps

  • 7” Capacitive Touch Technology LCD Display 800×440 resolution, with screen password
  • 32bit core, 8kB I cache and 8KB D cache
  • Support Wi-Fi BACnet, MS/TP BACnet Protocol & MODBUS RTU Protocol
  • System Bus RS-485 Serial Port for BACNet/Modbus protocol
  • Support Auto Frame & Alarms
  • Support 4 individual schedule program (6 events per day)
  • Non-volatile memory: store all internal settings
  • 6 Universal Inputs, 6 Relay Output (13A), 4 Universal Analog Outputs
  • Built-in calibrated Temperature Sensor
  • Fully programmable system, using Linux operating system
  • Support Mobile Application (Android & IOS), Multi Langue’s
  • Sustainable Green Building Solution & Energy Management solutions
  • Powerful configurable controller large equipment, small facilities, and supervising of control networks
  • Using Linux Operating System

Technical Specs

Technical Specification
Operating supply voltage 110-230 VAC ± 10%, 50/60 Hz
Relay Power output 24-230 VAC± 10%, 50/60 Hz
Relay Output Current load 13A (resistive load)
Controlling temperature 5 – 35°C/ 40 – 95°F, 0.5°C / 1°F
Temperature Accuracy ± 0.5°C / 1°F
Humidity Accuracy ± 3%
Working Environment -5°C~50°C
Storing Environment Temp -10°C~60°C
Programming 5-1-1/5-2/7-days Programmable
Approvals CE / R & TTE / UL / BTL
Mechanical dimensions 193(L) X 128(W) X 88.5(H) mm
Mounting holes Provided at the back of the cabinet
Mounting Mounting on wall or in enclosure
Wiring Screw-fixed


Wall Mount Installation:
Align the black line at Back Box with wall
Surface & arrow upward. Unscrew 4 screws

panel Installation:

With the Back Box arrow upward, install 4
screws (Screws not included) at Back Box 4
corners. Unscrew 4 screws.

Wiring Installation:

Removable Terminal Block can be detached from the PCB for wire connection. Power Terminal Block will be fixed on Power PCB so it is suggested to uninstall the PCB-C (3 metal screws & 1 plastic screw to fix the PCB)

After wiring on Power Terminal Block, re-install the 4 screws to fix the Power PCB.

Terminal block color as below:

Power Supply: Red
Relay Output: Grey
Universal Output: Green
Universal Input: Black
RS485: Blue


Align the Front Housing assembly with Back Box to engage
the Male pins with Female holder.

Fasten the 4 screws at Back Box at Top and bottom side.

Wiring Diagram: